| Model |
EPL-1000 |
| Hardware |
| Transmission speed |
Downstream: 1.25 Gbps
Upstream: 1.25 Gbps
|
| Optical specification |
Transmitter Power: 2 dBm to 7dBm
Receiver Sensitivity: Maximum -30 dBm
|
| Optical split ratio |
Up to 1:32 |
| Ports |
Uplink Port: 1 x Gigabit TP / SFP Combo Port (10/100/1000Base-T / SFP GbE )
PON Port: 1 x PON Port
Console Port: RS-232 Serial Port (9600, 8, N, 1)
MGMT Port: 1 x RJ-45 ( 10/100Base-TX) |
| LED Indicators |
1 x Power LED
4 x MGMT LED
4 x Uplink Port LEDs
7 x Status LED
|
| Software |
| EPON Features |
• Compliant with IEEE 802.3ah
• 802.3ah Forward Error Correction support
• Operation Administration Management (OAM) protocol based on
IEEE 802.3ah
• Dynamic Bandwidth Allocation (DBA) Support
|
| Standard |
IEEE 802.3ah
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
IEEE 802.3z
IEEE 802.1d
IEEE 802.1p
IEEE 802.1q
IEEE 802.1x
|
| System Feature |
• MAC address learning and binding
• Service Level Agreement (SLA) support
• Unicast, broadcast and multicast traffic control
• 128-bit Advanced Encryption Standard (AES) encryption
• MAC Filtering
• Supports QoS based upon Port, IEEE802.1p, IPv4 Type of Service
(ToS) or Differentiated Services (Diff-Serv), IPv6 Traffic Class,
802.1Q VLAN ID, Destination MAC address or Source MAC address
• Supports IGMP Proxy / Snooping
• Remote loop-back test
• Up to 256 Logical Link IDs (LLID)
• IPv4 and IPv6 support
• Up to 4096 VLAN support
• 4K MAC Addresses support
• 32 Queues (upstream / downstream)
|
| Management |
• User-Friendly GUI Utility
• Local RS-232 CLI management
• Firmware and Configuration upgradeable via Utility
• Remote ONU Management
|
| Environment Specification |
| Dimension (W x D x H) |
432 x 207 x 43mm |
| Power |
100 – 240V AC |
| Temperature |
Operating temperature: 0 ~ 50 Degree C
Storage temperature: -30 ~ 60 Degree C
|
| Humidity |
Operating Humidity: 10 ~ 90% non-condensing
Storage Humidity: 5 ~ 95% non-condensing
|
| Emission |
FCC, CE |
