Saratota for LAN Networking and WAN Communications Products

NVF-200 VDSL 4 Band 25Mbps Ethernet LAN Extender

 

25Mbps FullDuplex distance up to 1.9Km

 

General Description The NVF-200LS works as Ethernet to/from VDSL subscriber-site conversion bridge. It uses QAM-based 4-Band VDSL technology. Which supports 5M/15M/25Mbps per port symmetrical bandwidth over phone wiring with long driver capable up to 1.9/1.3/0.8Km (6333/4333/2666 feet). The front-panel provides LEDs indication of system and interface status. The builtin POTS/ISDN splitter allows a standard POTS phone or ISDN device to be connected. Full or half-duplex mode of LAN operations is automatically sensed and configured. VDSL link rates are configured by local IP DSLAMs over a fix-speed and an auto-speed function. Therefore, NVF-200LS supports fix-speed, auto-speed, plug & play operations on the subscriber-site, and are part of an ideal solution for delivering cost-effective, high-performance broadband/multimedia services to Multi-Dwelling Units (MDU) and Multi-Tenant Units (MTU) environments such as hotels, campus, hospitals and point to point Application.

Key Features & Benefits • • Compliant with IEEE802.3 10BASE-T and IEEE802.3u 100BASE-TX standard • Compliant with ETSI, ITU, ANSI standards • Support auto speed and 25/15/5M fix mode selectable through DIP switch • Max distance 5M/5M distance up to 1.9km(6333ft), 15M/15M distance up to 1.3km(4333ft), Max speed 25M symmetrical and distances up to 800m(2666ft) • Supports 1 * RJ-11 connector for Ethernet over VDSL • Supports 1 * RJ-11 connector for telephone/PBX connection • Supports 1 * RJ-45 port for 10/100Mbps Ethernet with Auto MDI/MDIX • Supports 1* DIP Switch for speed selectable(NVF-200LS only) • Supports long packet size up to 1536 bytes • Supports POTS/ISDN voice pass • Supports 4wires phone set pass through • Voice and Data work on the same telephone line • Spectral compatibility with xDSL, ISDN (2B1Q/4B3T) • Supports flow control IEEE802.3x for Full Duplex / Back Pressure for Half Duplex • Supports Surge protection • Provides Power LED and LED indication Link/Active Status for Ethernet port and Link/Speed for VDSL port • Plug & Play, mini size and metal case for outdoor application • EMI certified by CE, FCC Class B, and VCCI Class B • Safety compliant EN60950-1 • External Power Adapter: Input: AC 85~240Volts/50~60Hz Output: DC 5V/1A .

Application Diagram     TOP Detailed View

Product Specifications Standard: IEEE802.3 standard IEEE802.3u standard Compliant with ETSI, ITU, ANSI standards Interface: 1 * RJ-45 10/100Mbps Ethernet port 1 * RJ-11 connector for EoVDSL 1 * RJ-11 connector for telephone connection 1 * DIP Switch(NVF-200LS only) Cable Connections: RJ-45 (Ethernet): Category 3, 4, 5 UTP/STP RJ-11 (EoVDSL): Twisted-Pair phone wire LED indication: Power Link/Active Status for Ethernet port Link/Speed for VDSL port VDSL Frequency Spectrum: NVF-200LS Transmitter: 900 kHz ~ 3.9MHz Receiver: 4MHz & 7.9MHz POTS/ISDN pass filter Spectrum: 0 ~ 630kHz Typical Power Consumption: 2.15W Operating Temperature: -20°C ~ 70°C (-4°F ~ 158°F) Storage Temperature: -20°C ~ 70°C (-4°F ~ 158°F) Humidity: 10 to 90% (non-condensing) Dimensions: 95 x 110 x 24 mm (3.74" x 4.33" x 0.94")